The
complete drainage solution for wet floor
showers
Level access wet floor showers
are becoming more popular in the UK for
both domestic and special needs. Builders
and developers are discovering that we
do not have to step in and on to high
shower trays and that wet floor shower
areas are easy to install, look good and
are practical.
The shower drain is a unique way of fitting
the drainage for gravity waste on single
shower areas. All shower drain models
are Dalmer solos traps which, when connected
to the shower drain, measures a depth
of only 128mm. A vertical option measures
215mm.
Why use a Shower
Drain?
It is a means of converting a conventional
top access shower trap into a wet floor
vinyl or tiled system and is a large saving
on using expensive floor drains or gullies.
Converts a shower
waste trap for wet floor shower use
The shower drain is ideal for easier installation
of drainage when using the Aqua-Dec preformed
shower floor system because it is a two
part operation, making pipe connections
easier.
Gravity
Waste Options
Stainless Steel Tile Tops come in either
7mm (which can be adjusted upto 12mm)
or a 12mm (which can be adjusted upto
20mm).
|
Stone
Coloured Plastic Tile Top
Horizontal
or vertical options
Maximum
flow rate 21 litres per minute |
|
Stone Coloured Vinyl Floor Finish
Top
Horizontal
or vertical options
Maximum
flow rate 21 litres per minute
|
 |
Grained Stainless Steel Top
Matt
Grained Finish
Horizontal
or vertical options
Maximum
flow rate 21 litres per minute
|
|
Mirrored Stainless Steel Top
Highly Polished Finish
Horizontal
or vertical options
Maximum
flow rate 21 litres per minute
|
Top
|
