Aqua-Dec Overview

Aqua-Dec is the ultimate solution in level access showering when used in conjunction with Tilesafe.

Providing a cost effective solution for level showers

The innovation and design of the Aqua-Dec is based around the difficulties faced by an installer who would ordinarily install their own floors. The idea is to reduce the manual labour and provide a cost effective, robust and practical preformed shower base.

A quality product made with care

The Aqua-Dec is manufactured using high quality glass reinforced plastic. The glass surrounds the core and is then heavily press moulded to eliminate the risk of delamination.

Put to the ultimate strength test

The Aqua-Dec is very strong and can safely carry a weight of 256kg (40 stone). It is so tough that it just rests on the joists and, because it is so light, it can be installed by one person.


The Aqua-Dec suits both timber and concrete floors...

Timber floor

At 22mm thick, the Aqua-Dec is ideal for most timber and first floor set-ups. To fit the dec the floorboards are removed. When the drainage and pipe work have been installed the dec can then be permanently fixed to the joists. The remaining floor must finish level with the dec's edges in preparation for the covering of your choice.

Concrete floor

On concrete floors the Aqua-Dec can be let in to the concrete screed and, when the pipe work has been completed, can be bedded down to sit level with the existing floor. The flooring can then be laid over the entire bathroom floor and over the newly installed dec.

Floating floor

The chipboard covering and insulation is removed. To prevent chipboard movement support the edges of flooring with timber. The supports also carry the Aqua-Dec which is eventually fixed to it after the plumbing has been completed. Then the standard flooring process can be completed.